Heat Treatment Secrets for Bladesmithing

Heat Treatment Secrets for Bladesmithing PDF Author: Wes Sander
Publisher: Forginghero Publishing
ISBN: 9781951035020
Category :
Languages : en
Pages : 100

Book Description
Powerful techniques to heat treat your knife at home or in a small workshop Do you want to avoid the heart break of chipping or shattering your knife, that you spent hours to make? Do you want to heat treat your knife at home or in your workshop, instead of spending money on getting it done from a heat treatment company? Does understanding heat treatment seem time-consuming and difficult, and you want to achieve good results without much effort? I, Wes Sander, will share my secret to hardening and tempering knives such that they remain tough and can hold an edge for long. In this book you will discover: - One simple technique, used by master bladesmiths, that will prevent your knife from shattering, even if it's your first time making a blade - The biggest heat treating mistake you could be making, that is ruining the quality of your blades - 1 crucial heat treatment step, without which your whole heat treatment process is futile - 1 quenching tip that will get you a harder knife fast - One easy-to-find quenching oil, that is not only effective, but also reduces the chances of your knife cracking - 1 serious mistake that could cost you your whole workshop - How to make a simple forge, so you can start heat treatment even in your backyard or a small worshop Here are the answers to some questions you might have about this book: Q: I don't have a forge. Can I still heat treat my knives? A: Yes. This book actually has a guide to making a small forge. On top of that to temper your knives, you can simply use an electric oven. So, even if you don't have the tools, with the help of this book you can make the tools first and then heat treat. No matter how humble your workshop, you can achieve a good heat treat on your knives if you know the techniques well. Q: Will the techniques mentioned inside this book work for me? A: Yes. The techniques inside this book are tried and tested, and have been described in a practical manner, such that you can read and apply the techniques simultaneously. Bladesmiths of any skill level can do this. Q: Will this book be easy to understand? A: This book has been written in a practical fashion such that you can apply these techniques the minute you read them. Unlike some other heat treatment books, this book is dedicated to blademaking steels, including Damascus and stainless steel. All temperatures are in Fahrenheit, so it easy for you to adjust settings on American equipment. You absolutely don't need to know metallurgy to start heat treating your knives. Everyday that you delay is another day that you either spend excess money on sending your knives to heat treatment plants OR take the risk of shattering your knife altogether. So if you want to stop that and always get tough and sharp knives then... Take action now and buy this book by clicking the 'Buy Now with 1-click button'

Bladesmithing Compendium for Beginners: Beginner's Guide + Heat Treatment Secrets + Bladesmithing from Scrap Metal

Bladesmithing Compendium for Beginners: Beginner's Guide + Heat Treatment Secrets + Bladesmithing from Scrap Metal PDF Author: Wes Sander
Publisher:
ISBN: 9781690655459
Category :
Languages : en
Pages : 158

Book Description
If you want to make knives with simple tools, then keep reading... Do you feel that reliable sources of bladesmithing information are expensive and scarce? Do you want to start without breaking the bank with expensive machinery? Have you come across the perfect piece of scrap steel, but dont know how to turn it into a knife? Are you always getting your knife shattered or warped, every time you attempt to heat treat it? Are small imperfections in your knives frustrating you? I, the author, also faced such problems. That's why I compiled this book, to help a beginner get started in all basic aspects of knife making. Note: This book has 3 manuscripts Book 1: Bladesmithing for Beginners: Make Your First Knife in 7 Steps Book 2: Bladesmithing from Scrap Metal: How to Make Knives With Leaf Springs, Saw Blades, Railroad Spikes, and Files Book 3: Heat Treatment Secrets for Bladesmithing Inside this book you will discover: The most cost-effective method to make your first knife The only 4 tools you need to make your first knife How to set up a good workshop, without breaking the bank with expensive machinery The #1 high-performance steel you should use to make knives How to get a satin finish on your knife, without using power tools How to heat treat 1095 steel, without risking it to warp or shatter 1 simple test that will determine the sharpness of your knife How to get good grind lines, without using a grinding jig How to repair knife warps after heat treatment A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife The #1 scrap steel any beginner should start with How to make sure your knife scales lie flush against your blade, even if you don't have a belt sander The best way to reduce the size of a leaf spring that is too big, even if you dont have a power hammer One simple test that will ensure that your scrap steel is worthy of being made into a knife 1 crucial heat treatment step, without which your whole heat treatment process is futile 1 quenching tip that will get you a harder knife fast One easy-to-find quenching oil, that is not only effective, but also reduces the chances of your knife cracking The biggest heat treating mistake you could be making, that is ruining the quality of your blades You will also receive not one but two free bonuses: How to make a simple forge, so you can start heat treatment even in your backyard or a small worshop How to make an anvil from a railroad track Do I need to have tools before I read this book? Only the bare minimum are required. The rest you can make or acquire along your journey. The book even has a step-by-step guide to making your own forge, so you don't need to start out with one. Every day that you delay is another day you deny your desire to make knives. Get started now by scrolling up and clicking the 'Buy now' button

Bladesmithing

Bladesmithing PDF Author: Wes Sander
Publisher: Wes Sander
ISBN: 9781951035211
Category :
Languages : en
Pages : 146

Book Description
If you want to make knives with simple tools, then keep reading... Do you feel that reliable sources of bladesmithing information are expensive and scarce? Do you want to start without breaking the bank with expensive machinery? Have you come across the perfect piece of scrap steel, but dont know how to turn it into a knife? Are you always getting your knife shattered or warped, every time you attempt to heat treat it? Are small imperfections in your knives frustrating you? I, the author, also faced such problems. That's why I compiled this book, to help a beginner get started in all basic aspects of knife making. Note: This book has 3 manuscripts Book 1: Bladesmithing for Beginners: Make Your First Knife in 7 Steps Book 2: Bladesmithing from Scrap Metal: How to Make Knives With Leaf Springs, Saw Blades, Railroad Spikes, and Files Book 3: Heat Treatment Secrets for Bladesmithing Inside this book you will discover: The most cost-effective method to make your first knife The only 4 tools you need to make your first knife How to set up a good workshop, without breaking the bank with expensive machinery The #1 high-performance steel you should use to make knives How to get a satin finish on your knife, without using power tools How to heat treat 1095 steel, without risking it to warp or shatter 1 simple test that will determine the sharpness of your knife How to get good grind lines, without using a grinding jig How to repair knife warps after heat treatment A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife The #1 scrap steel any beginner should start with How to make sure your knife scales lie flush against your blade, even if you don't have a belt sander The best way to reduce the size of a leaf spring that is too big, even if you dont have a power hammer One simple test that will ensure that your scrap steel is worthy of being made into a knife 1 crucial heat treatment step, without which your whole heat treatment process is futile 1 quenching tip that will get you a harder knife fast One easy-to-find quenching oil, that is not only effective, but also reduces the chances of your knife cracking The biggest heat treating mistake you could be making, that is ruining the quality of your blades You will also receive not one but two free bonuses: How to make a simple forge, so you can start heat treatment even in your backyard or a small worshop How to make an anvil from a railroad track Do I need to have tools before I read this book? Only the bare minimum are required. The rest you can make or acquire along your journey. The book even has a step-by-step guide to making your own forge, so you don't need to start out with one. Every day that you delay is another day you deny your desire to make knives. Get started by buying this book now

Bladesmithing

Bladesmithing PDF Author: Wes Sander
Publisher:
ISBN: 9781713328209
Category :
Languages : en
Pages : 392

Book Description
Make your first knife this holiday season! Do you want to make your first knife but don't know where to start? Are you worried that you will need a lot of tools to get started? Have you made your first knife, a few maybe, but you feel like you could improve and expand your bladesmithing skills? I, Wes Sander, will share the secrets of making knives and swords using simple tools. I have put all my knowledge inside this bundle. So you get all that you need to know about making knives all in one place. This bundle includes 8 Manuscripts: Book 1: Bladesmithing for Beginners Book 2: Intermediate Guide to Bladesmithing Book 3: Advanced Guide to Bladesmithing Book 4: Heat Treatment Secrets for Bladesmithing Book 5: Bladesmithing from Scrap Metal Book 6: 101 Bladesmithing Mistakes Book 7: 101 Bladesmithing FAQ Book 8: 101 Bladesmithing Secrets In this book you will discover: - The most cost-effective method to make your first knife - The #1 high-performance steel you should use to make knives - The 10 step method to forge a pattern-welded Damascus sword - The only 4 tools you need to make your first knife - A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife - The biggest heat treating mistake you could be making, that is ruining the quality of your blades - How to set up a good workshop, without breaking the bank with expensive machinery - How to forge, assemble, heat treat, and polish a Japanese sword - How to make an anvil out of a railroad track - The #1 scrap steel any beginner should use to make knives This book has been made to avoid as much of the complicated jargon related to bladesmithing as possible, and the whole idea is to keep the book simple. Here are the answers to some questions you might have about this book: Q: What is this book about? A: This book is a compendium of 8 bladesmithing books that will teach you how to make knives and swords with simple tools Q: I have never done any kind of metal work before. Will it be easy for me to start? A: Yes. Even though the steps inside are simple, they have been explained in fair detail. You can make knives and swords with the help of this book, even if you have never lifted a hammer before. Q: Do I need to have tools before I read this book? A: Only the bare minimum are required. You can even start with just 4 quality hand tools to make your first knife. This book makes a great gift for someone that has an interest in bladesmithing and knives. Make this holiday season memorable by gifting them this book. Note: Some manuscripts inside this book don't have pictures The goal of this book is to make sure that you spend as little time reading while applying the knowledge inside. So if you want to start bladesmithing without spending hundreds of dollars on equipment then... Take action now and buy this book by scrolling up and clicking the 'Buy Now' button

Bladesmithing

Bladesmithing PDF Author: Wes Sander
Publisher: Wes Sander
ISBN: 9781951035556
Category :
Languages : en
Pages : 392

Book Description
Make your first knife this holiday season! Do you want to make your first knife but don't know where to start? Are you worried that you will need a lot of tools to get started? Have you made your first knife, a few maybe, but you feel like you could improve and expand your bladesmithing skills? I, Wes Sander, will share the secrets of making knives and swords using simple tools. I have put all my knowledge inside this bundle. So you get all that you need to know about making knives all in one place. This bundle includes 8 Manuscripts: Book 1: Bladesmithing for Beginners Book 2: Intermediate Guide to Bladesmithing Book 3: Advanced Guide to Bladesmithing Book 4: Heat Treatment Secrets for Bladesmithing Book 5: Bladesmithing from Scrap Metal Book 6: 101 Bladesmithing Mistakes Book 7: 101 Bladesmithing FAQ Book 8: 101 Bladesmithing Secrets In this book you will discover: - The most cost-effective method to make your first knife - The #1 high-performance steel you should use to make knives - The 10 step method to forge a pattern-welded Damascus sword - The only 4 tools you need to make your first knife - A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife - How to set up a good workshop, without breaking the bank with expensive machinery - How to forge, assemble, heat treat, and polish a Japanese sword - How to make an anvil out of a railroad track - The #1 scrap steel any beginner should use to make knives This book has been made to avoid as much of the complicated jargon related to bladesmithing as possible, and the whole idea is to keep the book simple. Here are the answers to some questions you might have about this book: Q: What is this book about? A: This book is a compendium of 8 bladesmithing books that will teach you how to make knives and swords with simple tools Q: I have never done any kind of metal work before. Will it be easy for me to start? A: Yes. Even though the steps inside are simple, they have been explained in fair detail. You can make knives and swords with the help of this book, even if you have never lifted a hammer before. Q: Do I need to have tools before I read this book? A: Only the bare minimum are required. You can even start with just 4 quality hand tools to make your first knife. This book makes a great gift for someone that has an interest in bladesmithing and knives. Make this holiday season memorable by gifting them this book. Note: Some manuscripts inside this book don't have pictures The goal of this book is to make sure that you spend as little time reading while applying the knowledge inside. So if you want to start bladesmithing without spending hundreds of dollars on equipment then... Take action now and buy this book!

Bladesmithing: 101 Bladesmithing Secrets

Bladesmithing: 101 Bladesmithing Secrets PDF Author: Wes Sander
Publisher:
ISBN: 9781694876553
Category :
Languages : en
Pages : 90

Book Description
I used to struggle with knife making, but once I learned these secrets... Are you a bladesmith looking to get the most out of his next project? Are you looking for that one tip that could change the quality of your knives drastically? Are you stuck with a problem in your newest build, and are looking for a way to fix it? Are you looking to upgrade your bladesmithing skills within minimum time? Tips are a great way to enhance your bladesmithing knowledge and avoid mistakes. The best part is that they only have a small time investment of just a few seconds. That is why I have compiled 101 bladesmithing tips that any bladesmith can benefit from, regardless of his skill level. And as a starter, I want to reveal 2 tips for FREE: 1. If you want to have a sharp knife, while maintaining a thick spine, do a hollow grind for your knife. 2. Here's a slow but certain way to get good grind lines on your knife: Scribe a top line for the bevels on each side, and a center line. Start grinding with stone wheels, then switch to files. This is just a starter, there are 99 more tips that you will find inside this book. Inside this book you will discover: The #1 steel you should use to make your first knife The real reason why a $3000 knife commands it's price The 'golden rule' of bladesmithing and how it will help you make better knives 2 tools that can replace 50% of the tools in your shop for shaping and grinding One common household item you can use to darken the etch on your Damascus steel 1 heat treating mistake that could potentially double the time taken for heat treatment One mistake that could ruin your grind lines while using a belt sander The right grind to use on your knife when you want it to be a jack-of-all-trades The #1 grinding tool you should use, if your struggling with getting good bevel lines on your knife How to get good grind lines on your knife, with this 'slow and certain' method How to clean your sharpening stone An essential but overlooked part of knife design, that instantly marks you as either a master or a novice How this common household oil can become an instant quench tank How to quickly reduce the size of a large leaf spring, without using a power hammer The most cost-effective method to make a knife ...And many more valuable tips that could potentially upgrade your bladesmithing skills, or save your latest build. But will these tips be useful for all skill levels, even for the beginner? Yes, while there are some tips that will help you further along your bladesmithing journey, beginners can take advantage of most of the tips inside this book. Everyday that you delay is another day that goes by without you discovering that 1 tip that could improve the quality of your knives. Take action now and buy this book by scrolling up and clicking the 'Buy now' button

101 Bladesmithing Secrets

101 Bladesmithing Secrets PDF Author: Wes Sander
Publisher: Wes Sander
ISBN: 9781951035471
Category : Crafts & Hobbies
Languages : en
Pages : 92

Book Description
I used to struggle with knife making, but once I learned these secrets... Are you a bladesmith looking to get the most out of his next project? Are you looking for that one tip that could change the quality of your knives drastically? Are you stuck with a problem in your newest build, and are looking for a way to fix it? Are you looking to upgrade your bladesmithing skills within minimum time? Tips are a great way to enhance your bladesmithing knowledge and avoid mistakes. The best part is that they only have a small time investment of just a few seconds. That is why I have compiled 101 bladesmithing tips that any bladesmith can benefit from, regardless of his skill level. And as a starter, I want to reveal 2 tips for FREE: 1. If you want to have a sharp knife, while maintaining a thick spine, do a hollow grind for your knife. 2. Here's a slow but certain way to get good grind lines on your knife: Scribe a top line for the bevels on each side, and a center line. Start grinding with stone wheels, then switch to files. This is just a starter, there are 99 more tips that you will find inside this book. Inside this book you will discover: The #1 steel you should use to make your first knife The real reason why a $3000 knife commands it's price The 'golden rule' of bladesmithing and how it will help you make better knives 2 tools that can replace 50% of the tools in your shop for shaping and grinding One common household item you can use to darken the etch on your Damascus steel 1 heat treating mistake that could potentially double the time taken for heat treatment One mistake that could ruin your grind lines while using a belt sander The right grind to use on your knife when you want it to be a jack-of-all-trades The #1 grinding tool you should use, if your struggling with getting good bevel lines on your knife How to get good grind lines on your knife, with this 'slow and certain' method How to clean your sharpening stone An essential but overlooked part of knife design, that instantly marks you as either a master or a novice How this common household oil can become an instant quench tank How to quickly reduce the size of a large leaf spring, without using a power hammer The most cost-effective method to make a knife ...And many more valuable tips that could potentially upgrade your bladesmithing skills, or save your latest build. But will these tips be useful for all skill levels, even for the beginner? Yes, while there are some tips that will help you further along your bladesmithing journey, beginners can take advantage of most of the tips inside this book. Everyday that you delay is another day that goes by without you discovering that 1 tip that could improve the quality of your knives. Take action and buy this book now

Bladesmithing for Beginners

Bladesmithing for Beginners PDF Author: Wes Sander
Publisher:
ISBN: 9781690656494
Category :
Languages : en
Pages : 122

Book Description
If you want to make your first knife without breaking the bank with expensive machinery, then keep reading...Are you a beginner bladesmith looking to make his first knife?Are you looking for an inexpensive way to get started?Are you worried that you will need a lot of tools to get started?Are you afraid of mistakes you might make with your first project?Have you ever felt like making a knife, and realized that reliable sources of information on bladesmithing were scarce and expensive?I, Wes Sander, will share the secrets of making your first knife in 10 steps.In this book you will discover: The most cost-effective method to make your first knife How to forge a knife in just 10 steps The only 4 tools you need to make your first knife How to set up a good workshop, without breaking the bank with expensive machinery The #1 high-performance steel you should use to make knives The correct grit range of sandpapers you should use while hand sanding your knife How to get a satin finish on your knife, without using power tools 1 sharpening mistake that could ruin the entire edge of your knife How to heat treat 1095 steel, without risking it to warp or shatter 1 simple test that will determine the sharpness of your knife How to get good grind lines, without using a grinding jig How to repair knife warps after heat treatment A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife This book has been made to avoid as much of the complicated jargon related to bladesmithing as possible, and the whole idea is to keep the book simple.Here are the answers to some questions you might have about this book:Q: What is this book about?A: This book is a guide to making your first knife in 10 steps.Q: I have never done any kind of metal work before. Will it be easy for me to start? A: Yes. Even though the steps inside are simple, they have been explained in fair detail. You can make your first knife with the help of this book, even if you have never lifted a hammer before.Q: Do I need to have tools before I read this book?A: Only the bare minimum are required. You can even start with just 4 quality hand tools to make your first knife.The goal of this book is to make sure that you spend as less time reading while applying the knowledge in this book.I want you to get through this book quickly and start making knives.Every day that you delay, is another day that you deny your own desire for making knives.Take action now by scrolling up and clicking the 'Buy now with 1-click' button to receive this book instantly

Bladesmithing for Beginners: Make Your First Knife in 7 Steps

Bladesmithing for Beginners: Make Your First Knife in 7 Steps PDF Author: Wes Sander
Publisher:
ISBN: 9781951035204
Category : Crafts & Hobbies
Languages : en
Pages : 124

Book Description
If you want to make your first knife without breaking the bank with expensive machinery, then keep reading... Are you a beginner bladesmith looking to make his first knife? Are you looking for an inexpensive way to get started? Are you worried that you will need a lot of tools to get started? Are you afraid of mistakes you might make with your first project? Have you ever felt like making a knife, and realized that reliable sources of information on bladesmithing were scarce and expensive? I, Wes Sander, will share the secrets of making your first knife in 7 steps. In this book you will discover: The most cost-effective method to make your first knife The only 4 tools you need to make your first knife How to set up a good workshop, without breaking the bank with expensive machinery The #1 high-performance steel you should use to make knives The correct grit range of sandpapers you should use while hand sanding your knife How to get a satin finish on your knife, without using power tools 1 sharpening mistake that could ruin the entire edge of your knife How to heat treat 1095 steel, without risking it to warp or shatter 1 simple test that will determine the sharpness of your knife How to get good grind lines, without using a grinding jig How to repair knife warps after heat treatment A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife This book has been made to avoid as much of the complicated jargon related to bladesmithing as possible, and the whole idea is to keep the book simple. Here are the answers to some questions you might have about this book: Q: What is this book about? A: This book is a guide to making your first knife in 10 steps. Q: I have never done any kind of metal work before. Will it be easy for me to start? A: Yes. Even though the steps inside are simple, they have been explained in fair detail. You can make your first knife with the help of this book, even if you have never lifted a hammer before. Q: Do I need to have tools before I read this book? A: Only the bare minimum are required. You can even start with just 4 quality hand tools to make your first knife. The goal of this book is to make sure that you spend as less time reading while applying the knowledge in this book. I want you to get through this book quickly and start making knives. Every day that you delay, is another day that you deny your own desire for making knives. Make your first knife by buying this book now

Bladesmithing

Bladesmithing PDF Author: Wes Sander
Publisher: Wes Sander
ISBN: 9781951035372
Category :
Languages : en
Pages : 160

Book Description
Powerful bladesmithing techniques for beginner, intermediate and advanced knife makers Do you want to make your first knife but don't know where to start? Does your pride in your bladesmithing skills motivate you to take them to the next level? Do you want buyers to come begging to buy your knives? Are you constantly inspired by popular bladesmithing TV shows, and want to improve and compare to the master bladesmiths present on them? I, Wes Sander, will share the secrets of creating knives and swords that are easy to make yet strong and sharp. Note: This book has 3 manuscripts in 1 book Book 1: Bladesmithing: A Definitive Guide Towards Bladesmithing Mastery Book 2: Intermediate Guide to Bladesmithing: Make Knives, Swords, and Forge Damascus Book 3: Advanced Guide to Bladesmithing: Forge Pattern Welded Damascus Swords, Japanese Blades, and Make Sword Scabbards If you want to learn how to make a knife and deepen your bladesmithing knowledge, then this book is for you. In this book you will discover: - The most cost-effective method to make your first knife - How you can make your first sword, in just 17 steps, start to finish - The 10 step method to forging a pattern welded Damascus sword - 4 techniques that will 'reveal' the end grain texture of your Damascus knife - How to forge, assemble, heat treat, and polish a Japanese sword - The secret temperature to correctly temper your Japanese blade - The #1 high-performance steel that you should use to make knives - How to build a simple but effective forge - A simple technique, used by master bladesmiths, that will prevent your blade from shattering, even if it's your first time making a knife - How to set up a good working shop, without breaking the bank with expensive machinery Here are the answers to some questions you might have about this book: Q: I have never made a knife before. Can your book still help me to make swords and Damascus knives? A: Yes. The steps laid out inside this book have been designed to guide even the person who has no experience making knives, so you can get started no matter what your skill level is Q: How is the author qualified to teach these bladesmithing techniques? A: I, Wes Sander, am a bladesmith with several years of experience. I have forged many Damascus swords, knives, and katanas to effectively teach others how to do so. Additionally, I have had the privilege to attend many BLADE conventions and other exhibitions to know the craft of other bladesmiths as well. So yes, I would say I'm qualified to bring you results when teaching you how to make swords and knives. Q: I don't have a lot of tools to start. Can I still make knives and swords using your book? A: Only a few tools are required to start with this book. The rest you can make or acquire along your bladesmithing journey. The book even has a step-by-step guide to making your own forge. Even someone without a forge can start The number of ideas you can realise for your knives is directly related to your understanding of various bladesmithing techniques and the characteristics of different materials. Get started before you find the perfect piece of stock steel, but are unable to forge it. Take action now and buy this book